fbpx
Print this page
Friday, 19 October 2018 13:55

Pickle it now, don’t let it rot

Written by 
 In practice, silage is often not made at the optimal time, and little attention is paid to the silage-making process. In practice, silage is often not made at the optimal time, and little attention is paid to the silage-making process.

Making high-quality pasture silage should not be difficult, but it must be viewed as a supplementary feed, rather than just a necessity to manage pasture. 

NZ experimental results indicate that increasing silage quality by 2.3 MJ ME/kg DM increased MS production by 13, 17 and 41% in spring, summer and autumn, respectively. Higher quality feed will also increase BCS gain/kg DM eaten.

Making of silage should only be done from a true surplus and the objective is to preserve as many of the original nutrients as possible. In practice, however, silage is often not made at the optimal time, and little attention is paid to the silage-making process.

When grass is cut and left in a heap, it rots! Silage-making is the process of ‘pickling’ pasture to reduce the pH (acidity) to a level that stops the feed ‘rotting’ (i.e. stops microbial activity). 

This is achieved through packing the pasture and covering it with plastic to exclude air, while microorganisms burn the sugars in the grass to produce lactic and acetic acid. If the silage is exposed to air (e.g. torn plastic) a chain reaction occurs that reduces silage quality.

Pasture silage can be made either in a field stack, a pit/concrete bunker (on top of the ground) or as bales. Provided the quality of the material going into the silage is the same and proper attention is paid to compacting and covering the pasture, pasture silage quality should be the same from either stack/pit or baled silage. 

The decision to make bales or stack/pit silage is generally dependent on the farm system, the method of feeding silage and the infrastructure available for silage storage.

- Baled silage is more costly but enables flexibility of crop size and storage location onfarm and feeding out of small amounts on set occasions.

- Stack silage can also be stored in many locations and is cheaper than baled silage.

- Pit/bunker silage does not offer flexibility in storage but when properly used will result in less wastage. Pit silage is easier to compact and therefore to expel air.

More like this

Feed help supplements Canterbury farmers meet protein goals

Two high producing Canterbury dairy farmers are moving to blended stockfeed supplements fed in-shed for a number of reasons, not the least of which is to boost protein levels, which they can’t achieve through pasture under the region’s nitrogen limit of 190kg/ha.

Silage cover reduces wastage

Waikato farmer Dave Muggeridge was fed up with water seeping in through his maize silage cover and spoiling feed.

Balanced diets key to keeping cows in milk

Waikato dairy farmers are well-placed heading into the peak of summer, thanks to favourable growing conditions late last year that resulted in abundant onfarm feed reserves.

Featured

Fonterra names Templeman-Jones to Mainland Group board amid divestment

As part of preparing for a potential IPO in relation to the divestment process for its global Consumer business and integrated businesses Fonterra Oceania and Sri Lanka, Fonterra has named Anne Templeman-Jones as chair-elect of the Audit and Risk Committee for the Mainland Group board.

National

Lame stories from a country vet

Everyone from experienced veterinarians and young professionals to the Wormwise programme and outstanding clinics have been recognised in this year’s…

Machinery & Products

Gongs for best field days site

Among the regular exhibitors at last month’s South Island Agricultural Field Days, the one that arguably takes the most intensive…

Amazone extends hoe range

With many European manufacturers releasing mechanical weeding systems to counter the backlash around the use and possible banning of agrochemicals,…

Gong for NH dealers

New Holland dealers from around Australia and New Zealand came together last month for the Dealer of the Year Awards,…