fbpx
Print this page
Thursday, 18 September 2025 10:55

How to Make High-Quality Grass Silage

Written by  Staff Reporters
Good quality pasture silage is a good source of energy and protein for a milking cow. Good quality pasture silage is a good source of energy and protein for a milking cow.

Grass silage is pickled pasture, preserved through the conversion of its sugars into lactic acid by bacteria.

The process extends the shelf life of the pasture beyond what it would have if exposed to open air. To produce high-quality silage, both the quality of the original pasture and the fermentation process are crucial. Ensuring optimal dry matter content, rapid wilting, proper compaction, and effective sealing can help retain the nutrients and feeding value of the silage. It’s essential to feed out silage quickly once exposed to air to prevent spoilage.

It is impossible to produce high quality silage from low quality pasture, no matter how good the fermentation is. Both the quality of the ensiled pasture and the quality of the fermentation must be considered.

When pasture is ensiled, its sugars are converted into lactic acid by bacteria. It is the lactic acid which pickles the pasture, allowing it to be preserved for a lot longer than it would have been if left in the open air.

With well-preserved silage, losses in feeding value during fermentation will be small, and the final silage will be only slightly lower in feeding value than the original pasture.

Good quality pasture silage is a good source of energy and protein for a milking cow and can be used as a fibre source when feeding high sugar or starch feeds. However, a poor-quality pasture silage (made from low quality pasture, or ensiled with low quality fermentation, or both) will not support high milk yield and will only be suitable for dry cows, or as a fibre source to reduce risk of acidosis.

Losses when making pasture silage

Losses occur as sugars and protein in the grass is broken down by enzymes, and bacteria. This process starts as soon as the grass is cut. Losses decrease quality as well as quantity, because it is the highly digestible components which are most rapidly broken down.

Losses during harvesting

Losses depend on the dry matter (DM) of the pasture. The optimum DM for silage is 25-30% because total DM loss is minimised.

  • Cut in the morning of a sunny day, for rapid wilting. Cutting after 1-2 days' sunny weather will result in good sugar levels in the pasture, even when cut in the morning.
  • Avoid wilting for any more than 24 hours.
  • Compact the silage well. In a stack or pit, use the heaviest wheeled vehicle available.
  • Tractor wheels should not sink into the pile of pasture any further than the depth of rubber.
  • For baled silage make sure that a high density baler is used.
  • Seal the stack completely with a weighted, airtight cover. Wash old polythene before use to avoid contamination with the wrong bacteria.

More like this

How to make perfect silage

Creating perfect silage is both a science and an art, and it all begins with the right tools, according to machinery maker Claas.

When compaction is a good thing

Good silage starts by cutting the crop at the correct growth stage, followed by reducing moisture content, chopping to a consistent length, then stacking in a clamp.

Making high quality silage

It is impossible to produce high quality silage from low quality pasture, no matter how good the fermentation is.

Featured

Australia develops first local mRNA FMD vaccine

Foot and Mouth Disease outbreaks could have a detrimental impact on any country's rural sector, as seen in the United Kingdom's 2000 outbreak that saw the compulsory slaughter of over six million animals.

NZ household food waste falls again

Kiwis are wasting less of their food than they were two years ago, and this has been enough to push New Zealand’s total household food waste bill lower, the 2025 Rabobank KiwiHarvest Food Waste survey has found.

Editorial: No joking matter

OPINION: Sir Lockwood Smith has clearly and succinctly defined what academic freedom is all about, the boundaries around it and the responsibility that goes with this privilege.

National

All eyes on NZ milk supply

All eyes are on milk production in New Zealand and its impact on global dairy prices in the coming months.

Machinery & Products

Leader balers arrive in NZ

Officially launched at the National Fieldays event in June, the Leader in-line conventional PRO 1900 balers are imported and distributed…

JDLink Boost for NZ farms

Connectivity is widely recognised as one of the biggest challenges facing farmers, but it is now being overcome through the…

New generation Defender HD11

The all-new 2026 Can-Am Defender HD11 looks likely to raise the bar in the highly competitive side-by-side category.