fbpx
Print this page
Monday, 19 October 2020 10:23

Mower line-up gets makeover

Written by  Mark Daniel
John Deere has updated and expanded its mower conditioner line-up for 2021. John Deere has updated and expanded its mower conditioner line-up for 2021.

John Deere has updated and expanded its mower conditioner line-up for 2021.

These come in the form of the new five-metre centre pivot C500 and a redesigned four-metre centre pivot C400. Quick change knives come as standard and an industry-leading five-year cutter-bar warranty across the range. 

 Eight new Zero Series models are available, ranging in cutting widths from 2.5 metres to five metres – replacing all 600, 800 and 900 Series models. Conventional, trailed offset machines are dubbed S250, S300 and S350, while centre-pivot machines carry the C300, C350, C400, C450 and C500 numbering.

 For producers wanting to cover ground more quickly, the C500 is 10% wider than the previous model, the 956. It also utilises an overshot cross auger design, used on the JD 500R Rotary Windrower platforms, to move the crop from the cutter-bar to the conditioner rolls more efficiently. The layout is said to deliver improved cut quality and reduced trash content, while promoting faster drying through an improved windrow formation. 

The all-new C400 is lighter, offers better weight distribution and features wider conditioning rolls than its predecessor, the 946. It also features a repositioned driveline above the main beam of the tongue to improve access for easier servicing. All Zero Series Mo-Co’s include an extended five-year cutter-bar warranty that covers parts and labour.

All models utilise a low-profile cutter-bar and large, reliable shear-hub-protected drive gears with a single oil-check location. Additionally, the new Quick-Change Knife system, standard for 2021, reduces knife replacement times by more than 50% - compared to a standard bolted knife.

  At the rear of the machine, a Wide Swath Kit attachment using spreading vanes, is now standard equipment on Mo-Co’s from three to four metres wide. The C400 can be adjusted to create windrows up to 330 cm wide.

Conditioning options, to suit crops being harvested, include a simple impeller; a urethane roll conditioner for thicker stemmed grasses and leafy crops; or steel V-10 or Tri-Lobe roll conditioners that provide added durability.

 On the three and four metre machines, a new swivel hitch provides improved manoeuvrability and ease of transport. These also also allow for greater than 90-degree turning without chatter, noise or damage to the driveline.

More like this

Dayaveg Takes Delivery of 13th John Deere Tractor

The 2026 delivery of their thirteenth John Deere tractor marks a relationship with the brand that goes back over 40 years, in a business that was first registered in 1963 and a family enterprise that dates back over one hundred years.

John Deere Unveils JD, an AI Assistant for Farm Data

A long way from when AI meant plunging a plastic-covered arm armpit deep up a cow’s rear, John Deere has shown off its new artificial intelligence (AI) assistant, aptly called JD, which aims to simplify data processing on farms.

John Deere See & Spray Hits 10 Million Acres, 74% Savings

Developed in Australia and launched in 2021, John Deere’s See & Spray Select System uses camera-based green-on-brown technology to identify living green plant matter in fallow paddocks and apply herbicide only where it is needed.

Featured

HortNZ Backs National’s Plan for Vegetable Growers

The National Party’s policies to make it easier to grow fresh vegetables, secure reliable water and energy and simplify farm planning are practical changes that will give growers the confidence to invest, according to Horticulture New Zealand (HortNZ).

National

Machinery & Products