increase font size
MF5710 baler in action.
The 80-100hp tractor continues to be the workhorse in NZ, especially on dairy farms, and the picture is the same in the world's markets.
Hence designers at Massey Ferguson starting with a clean sheet and $350 million to design the Global Series with all the best points of utility tractors updated for the 21st century. Having seen the results of this project in the 4700 series in 2014, the imminent arrival of new 5700 models is sure to get the red and silver tractor fans excited.
The new 5709 and 5710 offer 92 and 102hp from the 4-cylinder, turbo-charged AGCO Power engines displacing 4.4L, and offering up to 410Nm torque at 1500rpm. These are mated to a 12 x12 transmission with six speeds, two ranges and a wet clutch / power shuttle operated by a lever under the left side of the steering wheel. As on the larger series this lever controls forward / reverse direction changes, and includes controls for aggressiveness of drive take-up, and a de-clutching action for making speed changes, all without using the the clutch pedal.
Levers either side of the seat control speeds and hi-lo ranges, acting directly on the gearbox selector rails for simple, easy and reliable operation.
4WD front axles have 55 degrees of steering angle for tight turns, and a 100% locking differential means positive traction is ensured in the toughest conditions. Rubber takes the form of 'meaty' radial tyres of 540-65R34 at the rear and 440-65 R24 at the front.
At the business end, a heavy-duty rear axle offers lift capacities up to 3300kg, and an open centre hydraulic system has flow up to 98L/min via twin gear pumps, the first powering the three point linkage and two rear remote valves, the second taking care of power steering, 4WD engagement, diff-lock and PTO. A six spline PTO runs at 540 or 540E speeds.
NZ spec tractors are offered in Essential Specification (ES) -- a semi-suspended, flat operator platform, levers on either side of the driver's seat for speed and range changes, pendant pedals suspended from the underside of the centre console, and hydraulic 'wet' brakes.
The package is further enhanced by electronic linkage control with a simple lever operation, radial tyres, folding ROPS frame and a larger fuel tank of 170L capacity.
AGCO has released details of the new SB.1436DB small square, or conventional baler, that rather unconventionally, produces two rows of bales per field pass, so doubling the output over a traditional single baler producing 14-by-18-inch bales.
Recently launched to complement the existing DM 8612 TL and DM 9614 TL machines, Massey Ferguson has added the heavy-duty 9614 TL and 10114 TL butterfly mowers to its DM range, with working widths of 9.6m and 10.1m respectively.
As a sign of the times, a sharp downturn in the global demand for tractors and machinery has seen some of the global players announcing lacklustre half yearly results.
Massey Ferguson has announced the launch of the new MF 9S Series, which includes six models with powers from 285hp to 425hp.
A tractor dealership celebrating 65 years selling Massey Fergusons, and other AGCO farm machinery, is still expanding, opening a new branch in Cromwell.
Among this year’s Primary Industry NZ (PINZ) Awards finalists are a Southlander who created edible bale netting and rural New Zealanders who advocate for pragmatic regulation and support stressed out farmers.
Rockit Global has appointed Ivan Angland as its new chief operating officer as it continues its growth strategy into 2025.
Nominations are now open for the Horticulture New Zealand (HortNZ) board.
A Mid-Canterbury dairy farmer is bringing a millennial mindset to his family farm and is reaping the rewards, with a 50% uplift in milksolids production since he took over.
OPINION: People have criticised Christopher Luxon for the time he’s taken to appoint a new chief science advisor.
A new Indonesian school milk programme is expected to significantly increase the country's total dairy consumption, creating opportunities for New Zealand and other global dairy players.
