fbpx
Print this page
Friday, 27 September 2019 11:40

New ploughs on show

Written by  Mark Daniel

No surprise to see the giant Kverneland Group will introduce several new plough ranges at Agritechnica, in Germany, in November.

Kverneland’s history dates back 140 years, when its first ploughs were made in Klepp, Norway. Ploughs have remained a key focus of the business.

The new ploughs are the 2300S, 3300S and 3400S mounted units and the semi-mounted 6500S Series. Production will begin early next year.

They will have many of the features first seen in the clever I-Plough launched in 2015, including the swept leg design, centralised skimmer adjustment and a new leaf spring design for the auto-reset system.

The new series will be sold alongside existing ranges and the older ranges will eventually be phased out.

Looking at how the new models slot into the product offering: the 3-, 4- and 5-furrow 2300S is the new version of the EG Series, with the 200 headstock. And the 4-, 5- and 6-furrow 3300S is the 300 comparison.

The 5-, 6- and 8-furrow 3400S ploughs are on-land/in-furrow versions of the PO, while the 5- to 8-furrow 6500S lines up with the PB series.

Headstocks for the mounted models use the same configuration as the I-Plough. This allows them to follow like a trailer when carried on its land wheel during transport. All new models can be optioned with Variomat manual or hydraulic variable furrow width adjustment which now has top and bottom rails to the side of the main beam. 

Depending on model, the furrow width can be adjusted between 30 to 55cm. The front furrow and draft links are synchronised automatically.

The 2300S and3300S models (rated to 240hp and 330hp, respectively) can be supplied with 85cm or 100cm inter-body clearances. The under-beam clearance has been increased from 70 to 80cm. 

Both series can be fitted with a packer arm or integrated Packomat press. The company notes that when ploughs are ordered for manufacture with the optional packer system, the headstock construction is manufactured from higher grade, close grain steel.

The new 6500S series also has many of the changes seen in the mounted ranges, and includes Cat 3/4 compatible headstocks and a larger 480-80R24 rear wheel.

www.powerfarming.co.nz

More like this

First KV Qualidisc 21000T harrow heads

Taking up a considerable portion of the Power Farming site at the recent South Island Agricultural Field Days near Christchurch, the Kverneland Qualidisc 21000T trailed compact disc harrow, the first sold in the southern hemisphere, has a working width of 12.25m.

Power Farming and Topcon join forces

Over the last half-decade, the rapid adoption of GPS, guidance and a host of management and data recording functions has emphasised the need for a knowledgeable and reliable product and support provider.

Kverneland upgrades baler, sets wrapping record

The Kverneland Group has announced several upgrades to its round baler ranges for 2025, much of it centred around automation, as well as the ability to wrap bales with film rather than net.

Tedder designed for heavier crops

Recently launched and likely to be an indent-only machine for New Zealand, Kverneland’s new 15.6 metre tedder is aimed at increased productivity and timeliness.

Spot fertiliser applicator keeps costs in check

The Kverneland Pudama principle delivers spot placement of fertiliser in maize, rather than continuous fertiliser placement. As a result, it has the capability to deliver a 25% saving on starter fertiliser, with no noticeable loss of yield.

Featured

Fonterra names Templeman-Jones to Mainland Group board amid divestment

As part of preparing for a potential IPO in relation to the divestment process for its global Consumer business and integrated businesses Fonterra Oceania and Sri Lanka, Fonterra has named Anne Templeman-Jones as chair-elect of the Audit and Risk Committee for the Mainland Group board.

National

Helping protect sheep from parasites

Everyone from experienced veterinarians and young professionals to the Wormwise programme and outstanding clinics have been recognised in this year’s…

Machinery & Products

Farmer-led group buys Novag

While the name and technology remain unchanged and new machines will continue to carry the Novag name, all the assets,…

Buhler name to go

Shareholders at a special meeting have approved a proposed deal that will see Buhler Industries, the publicly traded Versatile and…