fbpx
Print this page
Friday, 29 September 2023 11:55

Handles all shapes and sizes

Written by  Mark Daniel
The Hustler BaleXpress bale feeder can cope with any bale sizes in either round or square format. The Hustler BaleXpress bale feeder can cope with any bale sizes in either round or square format.

Designed as an alternative for those farmers who only feed round or large square bales, the Hustler BaleXpress bale feeder can cope with any bale sizes in either format.

The machine also deals with crops including straw, hay, chopped silage and vegetable waste. The company suggests it also offers a more convenient option for those farmers that have a front end loader to load the wagon. This is rather than the more typical units with rear lifting forks, which because of their length, typically are around three metres longer and can be more difficult to manoeuvre and lift bales.

Offered in three models – the TX 605, TX 805 and TX 1005 can handle loads of up to 8000, 12,000 and 15,000kg respectively. This means these bale feeders can handle 4 to 6, 6 to 8 and 8 to 10 rounds, depending on size – or 3 to 4, 4 to 5 or 5 to 7 large square bales.

Featuring the same hydraulic pushing blade as the Combi range, the bales are moved forward to the discharge area and 1650mm wide discharge conveyor.

The configuration means there is no need for floor chains, resulting in reduced maintenance and more precise control of how much material is deposited in the feed windrow.

The machines’ adjustable sides means they are capable of dealing with round bales of up to 6 feet in diameter and squares of up to 5 feet long. Meanwhile, the bale feeders’ compact overall dimensions offer improved manoeuvrability, with the manufacturer also claiming the highest bale capacity on the market.

Carried on heavy-duty axles and utilising tandem walking beams or tandem suspended undercarriages, Hustler points out the use of heavyduty, self-aligning bearings and protected shafts helps durability and prevention contamination. The bearings are also positioned outside the feed chamber.

The floor of the TX series is manufactured from 15mm thick Puck Board, which helps reduce bale friction and impart durability and is offered with a 10-year warranty.

Gearboxes are powered hydraulically with the machines needing two double-acting flows.

The drives feature 6-tooth sprockets manufactured from HardLine steel – the same material used for bulldozer blades. Meanwhile, their small diameter means less torque in the driveline and lower oil flow requirements.

The bale feeders are said to offer excellent visibility from the driver’s seat. Ease of use is complemented by a centralised greasing system for the axle assemblies and built-in chain tensioners for the discharge elevators that are also easily adjusted.

A range of options includes Hustler’s FeedLink weighing and management system – that can be fitted during manufacture or at a later date – hydraulic braking, high-visibility kit, oversize tyre equipment and a hydraulic parking jack.

www.hustlerequipment.com

More like this

New Michelin Tyres for Slurry Tankers and Trailers

Global tyre manufacturer Michelin has extended its agricultural trailer tyre range, with the introduction of its new WorkxBib series, designed for tipping trailers, slurry tankers and manure spreaders.

JCB Lifts Investment After Hydrogen Engine Milestone

Following the record-breaking success of its hydrogen-powered Hydromax, JCB is ramping up its investment in the business, key to the first major change at the executive level of the business, with George Bamford stepping up to the post of joint chairman, alongside his father Lord Bamford.

Massey Ferguson to Add Compact Tractors in ITL partnership

Massey Ferguson has announced a strategic supply partnership with International Tractors Limited (ITL), a manufacturer of low-horsepower and compact tractors, with recognised brands such as Sonalika and Sollis, to expand its portfolio with a new tractor range.

Case IH Wins EIMA Award for Optum Suspension System

With the biannual Italian EIMA machinery Expo less than a month away, Case IH has taken out a Technical Evolution award for the Advanced Vehicle Suspension system available on its Optum 360–440 series tractors.

The Advanced Vehicle Suspension system, available on Optum 360, 390, and 440 models, responds to changing conditions, automatically adjusting how the suspension reacts to absorbs shocks and controlling vehicle movement.

In operation, sensors monitor the vibrations transmitted from the tractor chassis to the operator cabin, allowing the system to adjust suspension damping in real time. The control system incorporates key priorities, such as comfort at lower speeds and stability as speed increases, while also reacting to factors such as lower tyre pressures, where the tyres absorb more of the initial shock.

Case IH said as suspension requirements change throughout the working day, as tractors move between the paddock and road transport, the system manages suspension response in the background as tasks, speeds and conditions change, leaving the operator without the need to make manual adjustments.

Richard Hollins, Optum series tractors global product manager, said: “Pioneering technology must earn its place in the working day. Farmers and contractors will judge an investment by what it delivers, including manageable ownership costs, dependable up-time and the versatility to tackle different jobs. With AVS, we are putting intelligent control to work for comfort and stability, without giving the operator another setting to manage.”

Organised by FederUnacoma, the Italian Agricultural Machinery Manufacturers Federation, the contest has been part of EIMA since 1986, with the Technical Evolution distinction awarded to products that introduce original improvements to solutions already manufactured or patented.

www.caseih.com

Featured

Editorial: Support Dairy

OPINION: Political parties are getting plenty of advice and recommendations from sector groups as the election approaches.

National

Machinery & Products