fbpx
Print this page
Thursday, 25 February 2021 09:55

Better sowing accuracy

Written by  Mark Daniel
The Väderstad Spirit 400C/S pneumatic seed drill is designed to deliver greater seeding precision. The Väderstad Spirit 400C/S pneumatic seed drill is designed to deliver greater seeding precision.

Väderstad has updated its Spirit 400C/S pneumatic seed drill, which aims to deliver greater seeding precision, user-friendly electronics and a high field performance in the 4-metre seed drill sector.

The new unit includes the innovative E-Control control system, including ISOBUS Task Control, updated hydraulics, SeedEye blockage monitoring and increased general access.

“The Spirit family is known to provide impressive precision at high working speeds on the field,” says Björn Jeansson, Väderstad’s commercial product manager for seed drills. “The new update of Spirit 400C/S makes it benefit from key features from the larger models in the Spirit range.”

Benefitting from a raft of features taken from larger models in the range, the Spirit 400C/S is equipped with a high-capacity hopper with an integrated fan, two access platforms and an open machine design to provide better access to all components throughout the machine. An updated hydraulic system is delivered with active seed coulter pressure, which is adjustable following harrow pressure and automatic headland sequence control.

In the paddock, the driver has full control over the seeding operation via the iPad-based, Väderstad E-Control system.

SeedEye blockage monitoring allows seed and fertiliser output to be visualised in real time. This means, if any deviations should occur, the system gives an immediate warning so that any impact on the drilling can be quickly resolved.

The new Spirit 400C/S is available as the seed-only, Spirit 400S, as well as seed and fertiliser versions called Spirit 400C FIX and Spirit 400C InLine.

The FIX version places the fertiliser in 5cm wide strips at 125mm row spacing, in front of every seed row. The Spirit 400C InLine version is designed to apply a low-rate starter fertiliser, via a separate outlet, together with the seeds in the seed coulter.

On Point!

Väderstad has introduced the new 80/120mm point, which at a working depth of 10-15cm, combines the advantages from the 80mm and 120mm points into one assembly.

Built using high-quality Swedish steel, the point is said to deliver agressive cultivation, combined with a very intensive mixing. Having a narrower bottom section, the 80/120 point has the benefit of great soil penetration ability combined with an impressive straw incorporation, says Magnus Samuelsson, concept developer at Väderstad.

The 80/120mm point can be fitted to the Cultus, Opus and TopDown tine cultivators.

www.vaderstad.com/nz 

More like this

New Michelin Tyres for Slurry Tankers and Trailers

Global tyre manufacturer Michelin has extended its agricultural trailer tyre range, with the introduction of its new WorkxBib series, designed for tipping trailers, slurry tankers and manure spreaders.

JCB Lifts Investment After Hydrogen Engine Milestone

Following the record-breaking success of its hydrogen-powered Hydromax, JCB is ramping up its investment in the business, key to the first major change at the executive level of the business, with George Bamford stepping up to the post of joint chairman, alongside his father Lord Bamford.

Massey Ferguson to Add Compact Tractors in ITL partnership

Massey Ferguson has announced a strategic supply partnership with International Tractors Limited (ITL), a manufacturer of low-horsepower and compact tractors, with recognised brands such as Sonalika and Sollis, to expand its portfolio with a new tractor range.

Case IH Wins EIMA Award for Optum Suspension System

With the biannual Italian EIMA machinery Expo less than a month away, Case IH has taken out a Technical Evolution award for the Advanced Vehicle Suspension system available on its Optum 360–440 series tractors.

The Advanced Vehicle Suspension system, available on Optum 360, 390, and 440 models, responds to changing conditions, automatically adjusting how the suspension reacts to absorbs shocks and controlling vehicle movement.

In operation, sensors monitor the vibrations transmitted from the tractor chassis to the operator cabin, allowing the system to adjust suspension damping in real time. The control system incorporates key priorities, such as comfort at lower speeds and stability as speed increases, while also reacting to factors such as lower tyre pressures, where the tyres absorb more of the initial shock.

Case IH said as suspension requirements change throughout the working day, as tractors move between the paddock and road transport, the system manages suspension response in the background as tasks, speeds and conditions change, leaving the operator without the need to make manual adjustments.

Richard Hollins, Optum series tractors global product manager, said: “Pioneering technology must earn its place in the working day. Farmers and contractors will judge an investment by what it delivers, including manageable ownership costs, dependable up-time and the versatility to tackle different jobs. With AVS, we are putting intelligent control to work for comfort and stability, without giving the operator another setting to manage.”

Organised by FederUnacoma, the Italian Agricultural Machinery Manufacturers Federation, the contest has been part of EIMA since 1986, with the Technical Evolution distinction awarded to products that introduce original improvements to solutions already manufactured or patented.

www.caseih.com

Featured

Editorial: Support Dairy

OPINION: Political parties are getting plenty of advice and recommendations from sector groups as the election approaches.

National

Machinery & Products