fbpx
Print this page
Thursday, 12 March 2020 10:37

Are quads on the way out?

Written by  Mark Daniel
Will the side-by-side replace the ubiquitous quad on farms in NZ and Australia? Will the side-by-side replace the ubiquitous quad on farms in NZ and Australia?

Over the ditch, it sounds as if the death knell for quads is sounding.

This comes with the announcement by key player Polaris that it will withdraw ATVs from its offering by October and it’s already running down stocks.

The move is brought about by the fact that Australian farmers are choosing side-by-side type vehicles, ahead of new safety rules due to kick in during the next two years. This will make operator protection devices become mandatory under the the Consumer Goods (Quad Bikes) Safety Standard 2019.

The withdrawal will affect all Polaris quad bikes – including youth models. The company will focus on the sales of side-by-sides – such as the popular Ranger model, Polaris Australia & New Zealand managing director Alan Collins said.

“Over recent years the Australian off-road vehicle market has seen farmers transition en masse from quad bikes, to side-by-side vehicles,” he explained. “Polaris has a range of 30 vehicles with ROPS, while the market shift has been helped along in no small part by the safety rebates offered by SafeWork NSW and WorkSafe Victoria.”

Polaris suggests that the contraction of the quad bike market over the past five years in favour of side-by-side vehicles, with properly engineered ROPS and factory integrated safety technologies, means the market itself would probably end up signaling the end for quad bikes over coming years anyway. An acceleration of the switch is likely to happen as the new rules take effect.

The new standard requires suppliers of new and imported second-hand quad bikes to improve information for consumers via a hang tag warning for operators and additional information in the manual from 11 October 2020. It also requires manufacturers to improve machine designs to meet certain US and European directives by the same date.

Further improvements to the design of general use quad bikes are also required to reduce the likelihood of a rollover occurring. These include using stability requirements and a need to mitigate the harm if a rollover does occur, through the fitment of operator protection devices (OPD) from 11 October 2021.

This last requirement is at odds with the manufacturers of such machines, who state that the machines were designed to be ridden actively – a problem when fitted with OPDs. Manufacturers claim that the chassis of such machines were never designed to absorb the forces directed through them by an OPD. 

In New Zealand, Nathan Moore, national sales manager for Polaris says the company will continue to sell quad bikes here, but via a reduced line-up of core models. 

“If the NZ regulatory authorities decide to mandate the fitment of OPDs, it is likely we will have to re-consider and take a similar course as that being taken in Australia.”

More like this

A real NZ safety story

Back in 1990, Malcolm Gray was an importer and distributor of conventional motorcycle helmets.

Quad bike safety

Last year saw a major shift in the supply of ATVs or quad bikes in the Australian market, with the Consumer Goods (Quad Bikes) Safety Standard 2019 coming into effect on 11 October 2021.

ATV kit offers speed control, geofencing

Off-road specialists Polaris has launched a new speedcontrol and geofencing kit, aimed at keeping operators and workplaces safer by allowing users to set maximum speed limits and limit speeds in geofenced areas.

OPD coming on all Oz ATVs

With just a month to go before all new and secondhand imported ATVs bikes sold in Australia must be fitted with operator protection devices (OPD) and meet minimum stability requirements, one in six quad bikes for sale through dealerships do not meet the new national safety standards.

Featured

Sheep drench resistance costly

Analysis by Dunedin-based Techion New Zealand shows the cost of undetected drench resistance in sheep has exploded to an estimated $98 million a year.

Dairy sheep and goat turmoil

Dairy sheep and goat farmers are being told to reduce milk supply as processors face a slump in global demand for their products.

Hurry up and slow down!

OPINION: We have good friends from way back who had lived in one of our major cities for many years.

National

Knowing bugs means fewer drugs

A mastitis management company claims to deliver the fastest and most accurate mastitis testing available at scale for New Zealand…

Machinery & Products

AGTEK and ARGO part ways

After 12 years of representing the Landini and McCormick brands in New Zealand, Bay of Plenty-based AGTEK and the brands’…

100 years of Farmall Tractors

Returning after an enforced break, the Wheat and Wheels Rally will take place on the Lauriston -Barhill Road, North-East of…

JD unveils its latest beast

John Deere has unveiled its most powerful tractor ever, with the launch of the all new 9RX Series Tractor line-up…

Biggest Quadtrac coming to NZ!

In the biggest announcement that Case IH Australia/New Zealand has made around its tractor range, its biggest tractor is about…