fbpx
Print this page
Monday, 30 November 2015 16:33

TAMA urges caution when buying farm machinery from overseas

Written by 
TAMA board member John Tulloch says farmers need to carefully check whether they're dealing with a genuine and reputable dealer. TAMA board member John Tulloch says farmers need to carefully check whether they're dealing with a genuine and reputable dealer.

Kiwi farmers need to be cautious when purchasing farm machinery directly from overseas vendors, warns the Tractor and Machinery Association of New Zealand (TAMA).

TAMA president Mark Hamilton-Manns says the organisation is aware of a number of incidents, including a South Island farmer who paid a deposit and transport costs for a tractor advertised online, only to find the listing was a scam.

Some who received their purchases also encountered problems, including one facing a $20,000 bill for cleaning a second-hand mower, imported from Europe. The vendor claimed to have cleaned it but biosecurity inspectors found foreign matter in the machines.

"There have been numerous reports of online scams regarding tractors and farm machinery internationally and there has been at least one case of a New Zealand farmer being defrauded in this way," says Hamilton-Manns.

"He saw a second-hand tractor he liked online, checked out the website of the company listed as selling it and rang the phone number provided in the advert.

"Everything seemed all right, so he paid a 30 per cent deposit plus transport costs. Then the 'vendor' asked for additional transport costs. The buyer contacted the company named in the advert and found a fraudster had created a fake advert using the details of the genuine company and the machine they had previously sold. Only the phone number listed was that of the fraudster.

"It's not just scams which are the problem. One farmer dealt directly with an overseas dealer to buy a new baler wrapper which then broke down. The buyer's local farm machinery dealer had replacement parts but the warranty wasn't validated in New Zealand. The parts had to be shipped from the original dealer – leaving the machine out of action for quite some time."

TAMA board member John Tulloch says other problems farmers had encountered included machinery with different specifications to those normally used in New Zealand – such as different numbers of knives on a forage harvester or mowers running at incompatible speeds. Parts for those models may not be immediately available here.

"When you buy a tractor or farm machinery through an accredited dealer in New Zealand, they are trained to fully set up the machine and walk the customer through every step of the process," says Tulloch.

"There are so many factors involved with putting a machine on a tractor. For instance, arm heights – if you don't get that right it will not allow a mower to 'float'. Or setting the PTO shaft so you don't get vibration down the drive line. When you buy second hand from offshore the vendor isn't there to demonstrate how to use it – often you don't even get the manual.

Tulloch says farmers need to carefully check whether they're dealing with a genuine and reputable dealer. "Find out if the warranty will be validated in New Zealand and what back-up it provides, look into the compatibility of machinery and availability of parts and make sure you are getting the operating book.

"You also need to be absolutely confident a second hand purchase has been cleaned properly. If it gets stopped in biosecurity and needs to be waterblasted there is a risk of water getting into the sensor. All those costs of cleaning and repairs go to the purchaser importing it. Rather than saving money, you could end up tens of thousands out of pocket."

More like this

Positive signs, says McClay

First up to the podium at the recent Tractor and Machinery Association (TAMA) Conference in Wellington, Minster for Agriculture, Todd McClay, reflected on a difficult 12 months, but hinted at signs that things were turning the corner, saying “when ag does well, New Zealand does well”.

Time to cast the net past China

A 2022 Nuffield scholar, Lucie Douma, was brought up on a Southland dairy farm and as a hobby likes the risky business of trail running and ultra marathons.

Tractor, machinery sales dip

The recent Tractor and Machinery Association (TAMA) conference in Wellington was signalling cautious optimism on the back of rising milk and store cattle prices and drops in interest rates.

Changing of the guard at TAMA

Deere NZ territory manager Jaiden Drought was elected new president of the Tractor and Machinery Association (TAMA) at its August annual meeting.

Signs of life in Aussie farm machinery market

Following a couple of bumper sales years when the rolling year-to-date figure for 2022 hit about 16,250 tractors, it looks like things are changing in the Australian farm machinery landscape.

Featured

National

Bremworth CEO departs

Three weeks on from Bremworth’s board overhaul, the carpet maker’s chief executive Greg Smith is stepping down.

Machinery & Products

Buhler name to go

Shareholders at a special meeting have approved a proposed deal that will see Buhler Industries, the publicly traded Versatile and…

Grabbing bales made quick and easy

Front end loader and implement specialist Quicke has introduced the new Unigrip L+ and XL+ next-generation bale grabs, designed for…