fbpx
Print this page
Friday, 07 April 2023 10:55

Two decades of tractors at Le Mans

Written by  Mark Daniel
Claas is tipped to hit 200,000 units at its production line at Le Mans this year. Claas is tipped to hit 200,000 units at its production line at Le Mans this year.

Up until the new millennium, Claas had a been a harvest specialist, best known for its combines, self-propelled forage harvesters and an extensive range of mowers, tedders, rakes and both round and square balers.

In contrast, Renault had been the market leader in France during the 1980s with a near 20% share, but by the 1990s its share was declining to the point where it reached out to establish joint ventures with the likes of John Deere, Massey Ferguson and JCB.

In February 2003, the German head-quartered company signalled its aspirations of being a “long-liner” when it acquired a 51% stake in Renault Agriculture, the tractor division of the Renault Group, on the eve of the Paris SIMA Show.

At that time, the latest models were the Renault Ares range, introduced at SIMA in 1997, that started to appear in Claas’ seedgreen livery within a few months and by the end of the year the traditional Renault orange colour scheme colours was phased out.

With the product range now complete, Claas was able to display a “full line-up of products” at Agritechnica 2003 that included tractors, the Lexion 500 series combines, the Cougar selfpropelled mower and the latest generation Xerion.

Having acquired the majority stake, a complete acquisition of the Le Mans factory was completed in 2008, so Class moved from being a harvesting equipment specialist to full-line provider, along the way adding standard and specialist tractors to its range to complement the flagship Xerion systems tractor built in Harsewinkel.

Fast forward to 2013, the company produced the Axion 950, which in 2017 morphed into the Axion 900 Series Terra Trac Variants, the same year that a €40m factory revamp was completed to take production to over 13,000 units per annum.

By 2019, the 150,000th Claas tractor left the production line at Le Mans, with 2023 tipped to be the year that that total will hit 200,000 units.

Today, the facilities staff of around 1000 employees and operate state-of-the-art assembly lines, which produce more than 60 different models from 75 to 445 hp, sold to more than 80 countries, from simple tractors for with less stringent emissions standards for markets such as Turkmenistan or Africa. By contrast, tractors meeting the latest emission standards, such as the highvolume Arion 400 series, are sold throughout the European and the rest of the globe.

Le Mans is now a far cry from the glory days of Renault, which had been nationalised in a political move by Charles de Gaulle in 1944, to become a world-beating production facility owned by a German family business. Interestingly, the Renault Group still produces chassis components in the 103-year old factory for cars and light commercials, so not all ties with the past have been lost.

More like this

New Michelin Tyres for Slurry Tankers and Trailers

Global tyre manufacturer Michelin has extended its agricultural trailer tyre range, with the introduction of its new WorkxBib series, designed for tipping trailers, slurry tankers and manure spreaders.

JCB Lifts Investment After Hydrogen Engine Milestone

Following the record-breaking success of its hydrogen-powered Hydromax, JCB is ramping up its investment in the business, key to the first major change at the executive level of the business, with George Bamford stepping up to the post of joint chairman, alongside his father Lord Bamford.

Massey Ferguson to Add Compact Tractors in ITL partnership

Massey Ferguson has announced a strategic supply partnership with International Tractors Limited (ITL), a manufacturer of low-horsepower and compact tractors, with recognised brands such as Sonalika and Sollis, to expand its portfolio with a new tractor range.

Case IH Wins EIMA Award for Optum Suspension System

With the biannual Italian EIMA machinery Expo less than a month away, Case IH has taken out a Technical Evolution award for the Advanced Vehicle Suspension system available on its Optum 360–440 series tractors.

The Advanced Vehicle Suspension system, available on Optum 360, 390, and 440 models, responds to changing conditions, automatically adjusting how the suspension reacts to absorbs shocks and controlling vehicle movement.

In operation, sensors monitor the vibrations transmitted from the tractor chassis to the operator cabin, allowing the system to adjust suspension damping in real time. The control system incorporates key priorities, such as comfort at lower speeds and stability as speed increases, while also reacting to factors such as lower tyre pressures, where the tyres absorb more of the initial shock.

Case IH said as suspension requirements change throughout the working day, as tractors move between the paddock and road transport, the system manages suspension response in the background as tasks, speeds and conditions change, leaving the operator without the need to make manual adjustments.

Richard Hollins, Optum series tractors global product manager, said: “Pioneering technology must earn its place in the working day. Farmers and contractors will judge an investment by what it delivers, including manageable ownership costs, dependable up-time and the versatility to tackle different jobs. With AVS, we are putting intelligent control to work for comfort and stability, without giving the operator another setting to manage.”

Organised by FederUnacoma, the Italian Agricultural Machinery Manufacturers Federation, the contest has been part of EIMA since 1986, with the Technical Evolution distinction awarded to products that introduce original improvements to solutions already manufactured or patented.

www.caseih.com

Featured

Editorial: Support Dairy

OPINION: Political parties are getting plenty of advice and recommendations from sector groups as the election approaches.

National

Machinery & Products