increase font size
The Falcon 400 Pro feeding robot can cut and load silage from a 3.0m tall clamp.
While feeding dairy animals in New Zealand is largely centred around feed trailers, mixer wagons or baleage, one wonders whether there is a place for robotic feeders, particularly in South Island locations, where cows are housed during winter or full time.
Relatively new to NZ, the Euromilk brand sees the Rhino Vertical mixer wagons of 22 to 32 cubic metre, with twin auger configurations being sold by Farmchief.
Recently previewed at European trade fair, the Polish manufacturer was showing the Falcon 400 Pro feeding robot- a fully electric and autonomous machine that can cut and load silage from a 3.0m tall clamp.
The 4.0 cubic metre capacity mixing tub is equipped with six paddles and eight knives that mix and cut the feed, with the company suggesting that the configuration is faster and requires less power than a small vertical mixing auger.
In addition to loading clamp silage, the milling head can also fill the tub with baled straw and hay. Complemented by a hatch at the top of the mixing drum is a hatch where concentrates and minerals can be added.
Depends on the forage material and travel distances, the robot is said to be capable of mixing and feeding up to 18t a day, which the manufacturer reckons is sufficient to feed up to 350 cows.
Robot navigation is taken care of by RTK connected GPS, with obstacles being detected by a 3D camera, operating in combination with ultrasonic sensors. Pneumatic bumpers are fitted around the machine perimeter, in addition to strategically located emergency stop buttons.
At 3.5m long and 1.5m wide, the vehicle requires a feed passage with a minimum width of 2.5m., allowing feed to be distributed to the left and right, via and unloading belt with a 90cm discharge height.
The arrival of new F8 and F9 designations for its 8000 and 9000 series forage harvesters, signals a swag of upgrades from John Deere, highlighted by topping the 1000hp mark for the first time.
Waikato-Bay of Plenty farmer Hugh Jackson recently secured this year’s FMG Young Farmer of the Year title in Invercargill.
Ashburton-based Carrfields has signed an agreement with Manitou to take over the distribution and retail rights for Manitou Agricultural Equipment covering the lower North Island and the South Island, effective August 1, 2025.
With June ending and following the most upbeat National Fieldays for several years, tractor dealers are reporting a lift in sales.
Samasz distributor FarmShop has introduced the new XDF Series Front Mowers, said to be refined for local conditions and to improve cutting precision and wear resistance.
Acclaimed fruit grower Dean Astill never imagined he would have achieved so much in the years since being named the first Young Horticulturist of the Year, 20 years ago.
The Ashburton-based Carrfields Group continues to show commitment to future growth and in the agricultural sector with its latest investment, the recently acquired 'Spring Farm' adjacent to State Highway 1, Winslow, just south of Ashburton.
New Zealand First leader and Foreign Affairs Minister Winston Peters has blasted Fonterra farmers shareholders for approving the sale of iconic brands to a French company.
A major feature of the Ashburton A&P Show, to be held on October 31 and November 1, will be the annual trans-Tasman Sheep Dog Trial test match, with the best heading dogs from both sides of the Tasman going head-to-head in two teams of four.
Fewer bobby calves are heading to the works this season, as more dairy farmers recognise the value of rearing calves for beef.
The key to a dairy system that generates high profit with a low emissions intensity is using low footprint feed, says Fonterra program manager on-farm excellence, Louise Cook.
