fbpx
Print this page
Monday, 09 September 2019 09:38

Retro-fitted cup removers lift yield, save labour costs

Written by  Mark Daniel
Milktech says having automatic cup removers make life easy in the shed. Milktech says having automatic cup removers make life easy in the shed.

At least 50% of milking plants in New Zealand do not have automatic cup removers, says Milktech NZ.

That’s a surprise given that cup removers have been available since the 1970s.

“There are huge opportunities for NZ farmers to reduce labour and increase productivity by upgrading to automated cup removers,” says CEO and founder Gustavo Garza.

“Our CR-1 cup removers have features to make milking shed life much easier. They can be retro-fitted to existing systems.”

Milktech, formed last year, markets its NZ-designed and manufactured cup removers, plus accessories for herringbone and rotary milking sheds. 

Garza and colleagues Jeff Sharp and Alan Morris have expertise in dairy technology design, plastic design and moulding, dairy farming and business development. 

The company’s CR-1 electronic cup remover suits one-worker dairies and is robust, simple and reliable. It has a 3-inch stainless steel ram, an illuminated switch and a free-flow sensor. Its electronics are mounted high and safe in the milking plant, clear of moisture and muck.

In operation, a ‘lift and go’ process starts the cycle, and rapid venting at the end of the milking cycle causes a soft pull-down. Speed-adjustable retraction quickly pulls the cluster out of the working area.

The farmer can choose milking parameters controlled by software. The system is wi-fi connected and software upgrades are made in real time, enabling simultaneous adjustment of all units, rather than the typical use of individual control screens for each unit.

In-built diagnostics can alert operators to any issues during the milking cycle.

“There are huge opportunities for NZ operators to reduce labour and increase productivity by upgrading plant to automated cup removers. Our CR-1 removers offer a host of features to make life in the milking shed so much easier and can also be retro-fitted to existing systems as plant fails, usually at much lower cost,” says Garza.

At the end of cycle the CR-1 can trigger teat spraying, bail gate control in rotary sheds and a milk sweep to clear lines. The units have adjustable cluster drop and lift functions, LED status indicators and a manual mode for dealing with cows with blind quarters.

The units are available from dealers NZ-wide.

Export efforts have begun in Australia, Brazil, Argentina and Chile.

www.milktech.com 

Featured

Sheep drench resistance costly

Analysis by Dunedin-based Techion New Zealand shows the cost of undetected drench resistance in sheep has exploded to an estimated $98 million a year.

Dairy sheep and goat turmoil

Dairy sheep and goat farmers are being told to reduce milk supply as processors face a slump in global demand for their products.

Hurry up and slow down!

OPINION: We have good friends from way back who had lived in one of our major cities for many years.

National

Govt urged to reduce ETS units

The Climate Change Commission wants the new Government to reduce NZ Emissions Trading Scheme (ETS) auction volumes as son as…

Dairy sheep, goat woes mount

Dairy sheep and goat farmers are being told to reduce milk supply as processors face a slump in global demand…

Machinery & Products

All-terrain fert spreading mode

Effluent specialists the Samson Group have developed a new double unloading system to help optimise uphill and downhill organic fertiliser…

Can-Am showcases range

Based on industry data collected by the Motor Industry Association, Can-Am is the number one side-by-side manufacturer in New Zealand.