fbpx
Print this page
Thursday, 15 November 2018 09:10

Tankers, stirrers on show

Written by  Mark Daniel
Pichon slurry tanker. Pichon slurry tanker.

CB Norwood Distributors will be at the Effluent Expo (November 27, 28) with its Pichon slurry tankers and pond stirrers.

Pichon’s TCI (tanker with integrated chassis) range has been a key product since 1970, with the integrated chassis design assuring stability, durability and a very low centre of gravity. These come in a range from 2600 - 30,000L with single-, dual- or tri-axle suspension.

Inside the tanks, single, dual or triple baffles maximise stability particularly when partial loads are carried.

The design specifies dished heads at each end of the tanks for resistance to vacuum and pressure, and tank wall thicknesses vary from 5 - 8mm depending on tank diameter. This allows Pichon to offer a 5-year warranty on the TCI tank and the chassis, covering any premature strain or distortion during normal use. Tankers are galvanized inside and out for high resistance to corrosion and long service life. 

Modular design allows customising for various applications, with a range of spreading options including splash plates, dribble bars, disc and tine injectors. 

Accessories such as the autofill device remove the need to leave the cab when filling, delivering a clean and safe method of operation. 

Options include a choice of vacuum pumps, tyres, electro-hydraulic control and flow meters for automated regulation of quantities applied per hectare.

Pichon’s range of pond stirrers suit depths from 2.5 - 6.5m. These are designed for easy maintenance and a long life using hot dip galvanized components including the main frame. 

A screw propeller and counter blades -- rather than simple blades -- allow accurate mixing of the pit or pond, and provide uniformity of the slurry to reduce blockages and ensure even spreading.

More like this

Piggery effluent polluting stream

Waikato Regional Council has sought an interim Enforcement Order from the Environment Court to stop piggery effluent from entering a waterway north of Te Aroha.

Customers are the big winners

Nearing twelve months since CNH Industrial cancelled its distribution agreement for Case IH and New Holland products with CB Norwood Distributors on July 1, 2022, followed by the establishment of a new retail footprint for New Zealand, with Norwood now having departed from the CNH Industrial dealer network in January 2023, the events have ushered in some big changes that are creating more positive outcomes for customers across the country.

Featured

Sheep drench resistance costly

Analysis by Dunedin-based Techion New Zealand shows the cost of undetected drench resistance in sheep has exploded to an estimated $98 million a year.

Dairy sheep and goat turmoil

Dairy sheep and goat farmers are being told to reduce milk supply as processors face a slump in global demand for their products.

Hurry up and slow down!

OPINION: We have good friends from way back who had lived in one of our major cities for many years.

National

Govt urged to reduce ETS units

The Climate Change Commission wants the new Government to reduce NZ Emissions Trading Scheme (ETS) auction volumes as son as…

Dairy sheep, goat woes mount

Dairy sheep and goat farmers are being told to reduce milk supply as processors face a slump in global demand…

Machinery & Products

All-terrain fert spreading mode

Effluent specialists the Samson Group have developed a new double unloading system to help optimise uphill and downhill organic fertiliser…

Can-Am showcases range

Based on industry data collected by the Motor Industry Association, Can-Am is the number one side-by-side manufacturer in New Zealand.